The Fortus Plus series is built for fast and reliable parts production
With PrintOverride upgrades, you eliminate expensive OEM material licenses, use any filament, and unlock full capabilities. Choose your kit below.
Unlock Kits
Unlock Kits
EEPROM Freedom Kit
Disables chip write on the printer side. Any chip is seen as fresh. Unlimited reuse of OEM and Third party chips.
- Unlimited chip reuse - reinsert and reset
- Custom starting volume (coming soon)
- Prints with any third-party filament
- 100% digital install
- Reversible, warranty safe
Material License Unlock
Removes material license restrictions. Allows to use all materials machine designed for. Use any filament without OEM licenses or limitations. Full compatibility with advanced materials.
- No expensive OEM material licenses
- Full freedom for carbon fiber, high-temp materials
- Works with any supplier (Bambu, Polymaker, etc.)
- Reversible
USD 1,999+
Machine Upgrade
Unlock higher capabilities and materials on lower models. Purely software-based
- Access to premium materials and features
- Low-cost alternative to buying new printer
- Reversible
USD 4,999+
Depending on model
Engineering Access Kit
Full low-level parameters for third-party materials tuning.
- Customize profiles for any filament
- Advanced control for production quality
- Reversible
USD 1,999
ROI & Savings
ROI & Savings
Unlocking your Fortus Plus printer pays for itself in 2-4 weeks. Here’s how much you save compared to Stratasys OEM and competitors.
Parameter
Stratasys OEM / Competitors
PrintOverride
Your Benefit
Filament cost per kg
$200–1000 (OEM only)
$20–100 (any third-party)
Up to 90% savings
Supplier dependency
Full dependency on Stratasys or limited partners
Full independence — use any filament from any supplier
Freedom of choice, no vendor lock-in
Chip costs
Ongoing OEM chip purchases
Unlimited reuse of existing chips
Zero additional chip expenses
Yearly savings (at 500 cc/day usage)
–
$50,000+
Break-even in 17-28 days
Warranty & service risks
High (detectable mods, logs)
None (undetectable, fully reversible)
Safe service contracts
FAQ
FAQ
Does this void my Stratasys warranty or service contract?
No - the upgrade is 100% digital and fully reversible in under 5 minutes. Once rolled back, the printer looks exactly as it did from the factory. No hardware modifications, no soldering, no logs.
Is the upgrade detectable by Stratasys or dealers?
No - there are no traces in the printer logs. Our software upgrade is completely undetectable. Many clients continue using official service without any issues.
Will the printer be bricked or damaged?
No - the installation is purely software-based. If anything goes wrong (which has never happened), we have deep knowledge of every Stratasys printer and can restore the system from any state instantly. We provide remote support 24/7.
Can I use any third-party filament (Polymaker, Bambu Lab, etc.)?
Yes - once upgraded, you can print with any filament without restrictions. We help our clients to tune basic parameters for specific material (ASA, ABS, PC-ABS, etc.).
How does chip reuse work?
After the upgrade, the printer no longer interacts with the chip in the usual way. Any chip - even a depleted or locked one - is seen as fresh with a predefined starting volume. The user can choose the volume from several standard options (e.g., 123 ci for 2 kg spools, 200 ci, 500 ci, or any custom value) directly after the upgrade. Volume decreases normally during printing, but resets completely on reinsertion. This allows unlimited reuse of OEM chips without any restrictions.
Do I need OEM chips, spools or filament cartridges?
No — you are no longer locked into OEM filaments or spools. The printer only requires an OEM or third-party chip (in any condition) to initialize the spool. After that, you can use any filament without purchasing additional chips. Material type and volume are completely independent of the inserted chip.
F123 Series: Reuse the same OEM chip with any third-party spool. All 3D models for spool adapters are provided, including a 3D model of a new Material Bay designed for a 2kg spool.
Fortus Plus & older models: Load any filament into an OEM cartridge — no additional chips or cartridges are required.
Is it reversible?
Yes - rollback takes under 5 minutes. The printer returns to its original state, and all service contracts remain intact.
What if I have an older model (e.g., Dimension SST1200, Fortus 250)?
We also support older series with a lower price (300–500 USD). The same chip freedom and third-party filament support apply.
Do you provide support after installation?
Yes – 6 months of unlimited support + remote help. We’re always available via WhatsApp/Telegram.
Can you help with other printer issues (sensors, failures, etc.)?
Yes - we gladly help our clients fix common failures (sensors, heaters, boards, etc.). Stratasys and dealers usually replace entire modules at high cost and long lead times. We know the full electronics and can repair most issues quickly and cheaply, saving you time and money.
My printer model or feature is not in your list - can you help?
Yes - we always meet our clients halfway and provide custom solutions on request. Price is discussed individually for each case.
