Print x20 Longer with Flawless Quality.
OEM print heads last 750–1,000 hours. Our reinforced heads are designed for heavy use — up to 15–20,000 hours, fully compatible with abrasive materials like carbon fiber. Same quality from first to last hour.
Coming soon — contact us for early access.
Reinforced Print Heads
Reinforced Print Heads
Print with flawless quality 20× longer
Custom engineered and extensively tested by our team. Designed for heavy production and abrasive materials like carbon fiber. Lifespan 15–20,000 hours vs OEM 750–1,000 hours.
- 20× longer lifespan (15–20,000 hours)
- Premium materials: carbide feeding rollers, ceramic gears, high-grade bearings
- Full compatibility with carbon fiber reinforced filaments
- Consistent, high-quality prints from first to last hour
- No controller swap or complex installation
- Reversible and warranty-safe
Coming soon (early access available on request)
Price on request
ROI & Savings
ROI & Savings
Return on Investment for Reinforced Print Heads
Unlocking your F123 printer pays for itself in 2-4 weeks. Here’s how much you save compared to Stratasys OEM and competitors.
Parameter
Stratasys OEM / Competitors
PrintOverride
Your Benefit
Lifespan
750–1,000 hours
15,000–20,000 hours
20× longer
Cost per head
$1,000–2,500 (per type)
~$2,000 (unified 1–2 types)
Lower total cost over time (fewer replacements)
Print quality consistency
Poor from start (plastic mechanics)
Flawless from first to last hour
Superior surface finish and repeatability
Yearly savings (highvolume use)
–
$10,000–30,000+ (reduced downtime & replacements)
Break-even in 2-3 months
Bundle with other kits for additional savings. Contact us for custom ROI calculation based on your usage and material
FAQ
FAQ
Does this void my Stratasys warranty or service contract?
No - the upgrade is 100% digital and fully reversible in under 5 minutes. Once rolled back, the printer looks exactly as it did from the factory. No hardware modifications, no soldering, no logs.
Is the upgrade detectable by Stratasys or dealers?
No - there are no traces in the printer logs. Our software upgrade is completely undetectable. Many clients continue using official service without any issues.
Will the printer be bricked or damaged?
No - the installation is purely software-based. If anything goes wrong (which has never happened), we have deep knowledge of every Stratasys printer and can restore the system from any state instantly. We provide remote support 24/7.
Can I use any third-party filament (Polymaker, Bambu Lab, etc.)?
Yes - once upgraded, you can print with any filament without restrictions. We help our clients to tune basic parameters for specific material (ASA, ABS, PC-ABS, etc.).
How does chip reuse work?
After the upgrade, the printer no longer interacts with the chip in the usual way. Any chip - even a depleted or locked one - is seen as fresh with a predefined starting volume. The user can choose the volume from several standard options (e.g., 123 ci for 2 kg spools, 200 ci, 500 ci, or any custom value) directly after the upgrade. Volume decreases normally during printing, but resets completely on reinsertion. This allows unlimited reuse of OEM chips without any restrictions.
Do I need OEM chips, spools or filament cartridges?
No — you are no longer locked into OEM filaments or spools. The printer only requires an OEM or third-party chip (in any condition) to initialize the spool. After that, you can use any filament without purchasing additional chips. Material type and volume are completely independent of the inserted chip.
F123 Series: Reuse the same OEM chip with any third-party spool. All 3D models for spool adapters are provided, including a 3D model of a new Material Bay designed for a 2kg spool.
Fortus Plus & older models: Load any filament into an OEM cartridge — no additional chips or cartridges are required.
Is it reversible?
Yes - rollback takes under 5 minutes. The printer returns to its original state, and all service contracts remain intact.
What if I have an older model (e.g., Dimension SST1200, Fortus 250)?
We also support older series with a lower price (300–500 USD). The same chip freedom and third-party filament support apply.
Do you provide support after installation?
Yes – 6 months of unlimited support + remote help. We’re always available via WhatsApp/Telegram.
Can you help with other printer issues (sensors, failures, etc.)?
Yes - we gladly help our clients fix common failures (sensors, heaters, boards, etc.). Stratasys and dealers usually replace entire modules at high cost and long lead times. We know the full electronics and can repair most issues quickly and cheaply, saving you time and money.
My printer model or feature is not in your list - can you help?
Yes - we always meet our clients halfway and provide custom solutions on request. Price is discussed individually for each case.
